Description
This article explains which physical ports can be used on the FortiGate 200B when aggregate interface members are required.
Scope
FortiOS V4.1.2 and above.
Solution
Ports 1-10 on the FortiGate 200B are switch ports, and therefore do not support aggregating. Ports 11-16 can be used for Aggregate Interface members.
Note that in a future release of FortiOS the “aggregate” type will be removed as an option for ports 1-10 as shown below:
FG200B3909600061 # show sys interface aggre-second
config system interface
edit "aggre-second"
set vdom "root"
set type aggregate
set member "port10" "port11"
next
end |
