Description
In order to support the FortiWeb-VM HA cluster, Vmware ESX vSwitch should be configured correctly otherwise it will have a problem forming a cluster, or processing traffic after failover.
Scope
FortiWeb.
Solution
When a FortiWeb cluster is configured on VMWare ESXi, check that the following configuration of vSwitch is set:
Promiscuous mode, MAC Address Changes and Forged Transmits in vSwitch properties should all be set to 'Accept'.
If some of the settings will be shown as 'Reject' they can be changed by selecting the 'Edit' button and choosing the correct settings in the 'Security' tab.
Promiscuous mode, MAC Address Changes and Forged Transmits in vSwitch properties should all be set to 'Accept'.
If some of the settings will be shown as 'Reject' they can be changed by selecting the 'Edit' button and choosing the correct settings in the 'Security' tab.
