Meru Technical Note - Configure controller to support Vocera VoIP Phones

[Andy_G]

Description

How to configure controller to support Vocera VoIP Phones

Scope

KB ARTICLE TYPE: Configuration

RELATED PRODUCTS: controller

RELATED SOFTWARE VERSIONS: N/A

KEYWORDS: Vocera, IP phones, QoS

Solution
The Vocera Communications System is a breakthrough solution that enables instant voice communication when and where it’s needed—enhancing organizational productivity and customer service. Follow the steps mentioned below to configure controller to support Vocera.

CONFIGURATION STEPS:

CLI Steps:

STEP 1: Configure a separate vlan for VoIP application (always recommended)

vlan voice_vlan tag tag
ip address x.x.x.x x.x.x.x
ip default-gateway x.x.x.x
ip dhcp-passthrough
ip dhcp-override
exit

STEP 2: Configure ESSid

essid name
security-profile profile_name
vlan name vlan_name
vlan support configured-vlan-only
beacon dtim-period 1
beacon period 100
silent-client-enable
coordination-mode centralized
multicast-enable
publish-essid
exit

STEP 3: Open UDP port 5555

ip udp-broadcast upstream 5555
ip udp-broadcast downstream 5555

STEP 4: Configuring QoS

qosrule id netprotocol 17 qosprotocol none
dstport 5002
srcip x.x.x.x (vocera IP)
srcmask x.x.x.x
action forward
droppolicy tail
priority 0
avgpacketrate 1
tokenbucketrate 200
exit

GUI Steps:

STEP 1:Configuring Vlan

Configuration>>Wired>>Vlan
Vlan Name : vlan name
Tag : tag
Fast Ethernet Interface Index : 1/2
IP address : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
OK

STEP 2: Configure ESSid

Configuration>>Wireless>>Ess
Ess profile name : name
SSID : ssid
Security Profile : Select security profile
SSID Broadcast : ON
Tunnel Interface Type : Configured Vlan Only
Vlan Name : Select vlan name
Allow Multicast Flag : ON
OK

STEP 3: Allowing UDP traffic:

Configuration>>Devices>>System Settings>>UDP Broadcast UP>>Add Port
Configuration>>Devices>>System Settings>>UDP Broadcast Down>>Add Port
OK

STEP 4: Configuring QoS

Configurations>>QoS>>System Settings>>QoS and firewall rules>>ADD
ID : id
Destination Port: 5002
Source IP: x.x.x.x
Source Netmask : x.x.x.x
Network Protocol: 17
Action: Forward
Average Packet Rate: 1
Token Bucket Rate : 200
Drop Policy: Tail
OK