DescriptionWhat are the requirements for Meru Mesh design and implementation?
ScopeKB Article Type:
Design
Related
Products:
AP
Related Software
Versions:
Any
Keywords: Mesh,
AP
SolutionThe following
restrictions apply to the design and implementation of Meru mesh
networks.
- Enterprise Mesh APs require L3 connectivity to the
controller.
- Monitoring of backhaul links via SAM is not
supported.
- A radio that is not actively used for mesh cannot be used
for SAM purposes.
- Bridged mode is not supported for Enterprise Mesh—only
tunneled mode is
supported.
- Gateway and mesh APs support a maximum of 4 backhaul
links.
- From the gateway (i.e., an AP physically connected to the
network), a maximum of 3 hops is supported with no more than 16 APs per
cloud.
- A maximum of 500 stations can be active on a mesh cloud at
any given time.
- Minimum channel separation guidelines are to use
non-overlapping
channels.
- Mesh operation on DFS channels is not
recommended.
- Aggregation of multiple uplink connections is not
supported.
- A single AP cannot be assigned to multiple different
meshes