Why are my controller settings being changed by EzRF?
KB ARTICLE TYPE: Troubleshooting
RELATED PRODUCTS: NA
RELATED SOFTWARE VERSIONS: All versions
KEYWORDS: auto-sync
If EzRF is used to manage profiles over multiple controllers, EzRF will periodically synchronize the configuration. If EzRF is not required to automatically synchronize the configuration, please turn off auto-sync under configuration>wireless service>registration.
Note of caution:
If auto
sync is used and there are multiple registered members, please make sure
that each AP is only in ONE of the members. If not, "dual
brain" symptoms may be experienced. For example, if you make a
change in the controller and save config, the change will not be sync'd
to both profiles.
So, when an auto-sync happens, changes on the controller may be overwritten with unwanted prior config, coming from the registered member that did not get the previous update pushed from controller.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.