DescriptionUDP port configuration does not get saved on the controller.
ScopeKB ARTICLE TYPE: Design
RELATED PRODUCTS: All controller versions
RELATED SOFTWARE VERSIONS: All
KEYWORDS: UDP
SolutionStep 1: Open the GUI on controller
:Configure::Devices::System Settings::UDP Broadcast
Ports.Step 2: Click
on Add to add a port number for
Upstream/Downstream.
Step 3: The port will be listed under 'Allowed Ports'. By
default these ports appears to be unchecked but will be added to the
controller. This does not mean that the port, which you have added did
not save.
