Meru Technical Note - New Revision APs require 3.3-146 or Higher

[nsamuel]

Description
New Revision APs require 3.3-146 or Higher
Scope

KB ARTICLE TYPE: Field Notice

RELATED PRODUCTS: MC1000, MC1500, MC3000, MC3200, MC4100, MC4200, MC5000, AP201, AP208

RELATED SOFTWARE VERSIONS: 3.3-146 and later

KEYWORDS: Upgrade, Revision, AP201, AP208

Solution
Field Notice 1001: Factory Shipped MN-AP201 and MN-AP208 after1/30/07 Require System Director Version 3.3 or higher

January 21, 2007

NOTICE:

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE
OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION
ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. MERU
RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Affected Products System Director Version
MN-AP201, MN-AP208 -
MN-MC505 3.2.5 and earlier
MN-MC1015, MN-MC1030 3.2.5 and earlier
MN-MC3025, MN-MC3050, MN-MC3075,
MN-MC3100, MN-MC3150 3.2.5 and earlier

Table 1: Products affected by this field notice

Problem Description

Starting February 1, 2007, customers placing new orders for MN-AP201 and MN-AP208 will be
shipped a Rev2 version of the hardware platform. The Rev2 versions of APs are software compatible
only with System Director Software version 3.3 and later. To support the Rev2 AP platforms, it is
mandatory that customers running System Director Software versions older than 3.3 upgrade their
Meru controllers to version 3.3, or later.