Wireless Controller
Dedicated Wi-Fi control and management for high density and mobility
nsamuel
Staff
Staff
Article Id 191190
Description

How to configure a NTP server on the controller.


Scope

KB Article Type: Configuration

Related Products: All Controller Models

Related Software Versions: All code version

Keywords: Commands to enable time synchronization with an NTP server


Solution

CLI CONFIGURATION STEPS

Step 1 : Type "ntp sync"

Step 2 : Type "ntp server x.x.x.x" where x.x.x.x is the IP address of the NTP server.

Step 3 : Type "reload controller"

Step 4 : Type "show ntp-server" to validate the set ntp server.

LIMITATIONSA reboot is required for the changes to be implemented.



Contributors