While configuring WEP64 keys, an error is generated with regards to the length of the key.
KB ARTICLE TYPE: Troubleshooting
RELATED PRODUCTS: N/A
RELATED SOFTWARE VERSIONS: N/A
KEYWORDS: WEP64, ASCII WEP64
While configuring WEP64 keys and clicking on OK, an error “Length of ASCII WEP64 key must be 5” is generated.
STEPS TAKEN FOR TROUBLESHOOTING:
STEP 1: | Verify the length of the WEP64 key. It should be 5 characters (the ! character is not allowed). |
STEP 2: | If entering a key in hexadecimal format, 10 hexadecimal digits must be used, preceeded by 0x. |
RESOLUTION: | Preceeded the 10 digit hexadecimal key with 0x. |
ROOT CAUSE: | The hexadecimal key being configured was not preceeded by a 0x. |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.