DescriptionHow to enable 10 gig on the Controller?
SolutionRecommended steps to configure
the 10gig module.
Step1: Insert the 10 gig SFP
module onto the controller.
Step2: Import the 10 gig license
on to the controller.
Step3: Reboot the
controller.
Step4: Configure Switch side for
the fiber interfaces.
Step5: After controller reboots,
Enable the 10 gig using below
commands:
Controller# Config
termainal
Controller(config)# 10gig-module
enable
Controller(config)#
exit
Controller# reboot Controller
Step6: After the Controller has
been rebooted, the 10 gig module will be
configured.
