Meru Technical Note - How to turn on Diagnostic Inferences

[nmichael]

Description

How to turn on Diagnostic Inferences?

Scope

KB ARTICLE TYPE: Configuration

RELATED PRODUCTS: MC1500, MC3000,MC4100, MC5000 , MC4200

RELATED SOFTWARE VERSIONS: 4.x, 5.x

KEYWORDS: Inferences , Diagnostic

Solution
The following commands are to be used.

Controller#configure terminal
Controller(config)#diag-log
Controller(config-diag-log)#admin controller on
Controller(config-diag-log)#admin ap on
Controller(config-diag-log)#admin station on

Once Diagnostic Inferences are turned ON, the results can be viewed with the WebUI interface at Monitor> Diagnostics> Inferences