DescriptionChanging the admin password on the Network Manager
ScopeKB Article
Type: Configuration
Related
Products: EzRF
Related
Software Versions: All
software
version.
Keywords: admin,
EzRF,
password
SolutionCommands
to change the network manager ( EzRF ) password for the user
"admin"
CLI CONFIGURATION
STEPS:
Step
1 : Type "configure
terminal"
Step 2 :
Type "passwd admin"
Step
3 : At the prompt, enter the new password for admin. At the
next prompt, retype this password for it to be confirmed and stored for
future logins.
Step
4 : Type "exit" to return to the privileged exec
mode.
Case
1: After
entering the password the first time, if the next line reads "BAD
PASSWORD: it is too short..", this does not mean it has rejected the
password, it is merely a caution message. Proceed to confirm this
password by re-entering
it.
Case 2: After
entering the password in re-type the password, if the next line read "
Sorry, password doesn't match". please make sure the password entered
first and password entered in re-type password match. This error is
caused since the password didn't
match.
