Description
This article describes the steps to disable or enable intra-SSID privacy. Enabling intra-SSID privacy blocks communication between clients of the same access point.
This feature is disabled by default.
This feature is disabled by default.
Scope
FortiGate.
Solution
Use the following CLI commands:
config wireless-controller vap
edit <vap_name>
set intra-vap-privacy {enable | disable}
next
end
edit <vap_name>
set intra-vap-privacy {enable | disable}
next
end
where <vap_name> is the name for this Virtual Access Point.
In the GUI :
SSIDs -> Block intra-SSID traffic (enable)
