Description
This article explains how to configure captive portal for LDAP user.
Solution
First thing, configure the LDAP Server:
Go to User & Device -> LDAP Server
Select 'create new' and configure as following:
This article explains how to configure captive portal for LDAP user.
Solution
First thing, configure the LDAP Server:
Go to User & Device -> LDAP Server
Select 'create new' and configure as following:
The second step is to configure the user group to use:
Go to User & Device -> User Groups
Select 'create new' and configure as following:
Go to User & Device -> User Groups
Select 'create new' and configure as following:
Choose a specific group if required.
Then go to the interface to enable captive portal (wire or wireless)
Then go to the interface to enable captive portal (wire or wireless)
In 'Admission Control', 'Security Mode' choose 'Captive Portal'
Change 'User Access' to 'Restricted to a group'
In 'User Groups', choose the LDAP user
Change 'User Access' to 'Restricted to a group'
In 'User Groups', choose the LDAP user
Create the policy to permit access to this group to the required resources and test the configuration.
The captive portal will be displayed.
The captive portal will be displayed.
Related Articles
Technical Note: Application Control with Explicit Proxy policy error
Technical Note: How FortiGate can block Duolingo in different ways. Blocks web application.
