DescriptionNeed to use an IP Range as a criteria for a 2nd portal
ScopeVersion: 7.1.x and greater
SolutionVersion: 7.1.x and greater
Issue Example: I setup a second registration vlan, so I can send a different portal to clients who connect to that vlan. Using a host profile where the "where" is a port group, and that default port vlan is the new vlan, works great. (hardwired) but for a wireless client, if I put the actual ip of the client (attached ) that works, but a range doesn't work 10.9.84.0/24...since this will be the AP's with many SSID's/vlans, I can't do a port group. Is there a way I can send client who end up on that vlan to the second portal?
Solution: The for fields only wildcard is allow not subnetting so the soltion for the above example is to use 10.9.84.*