Description
This article explains how to change the VIP exit interface.
The VIP created with the specific exit interface/any interface and it is used in the configuration.
Once the VIP is referenced to other configurations, it is not possible to change the exit interface and interface config on the VIP shows grayed out as below:
Solution
To change the VIP exit interface, remove all the references to the VIP.
Go to the Policy & Objects -> Virtual IPs
Check Ref.
Click on the number, which shows where the VIP is used.
After removing the VIP from the reference configuration, Go back to the Policy & Objects -> Virtual IPsSelect the VIP and EditNow it is possible to change the interface on the VIP config.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.