Created on 09-19-2019 05:26 AM Edited on 04-01-2024 11:52 PM By Anthony_E
Description
This article explains how to create an OSPFv3 neighbor-ship using inter-VDOM links as users might experience issues.
Usefull link:
Fortinet Documentation
Technical Note: OSPFv3 (OSPF for IPv6) configuration example
Scope
FortiGate v6.0.6.
Solution
Changing vdom-link type to Ethernet (default ppp) solves the issue.
config system vdom-link
edit "vdom_link"
set type ethernet
next
end
Note:
It would not be possible to change the type of VDOM link in v7.2.x and later firmware. To change the type, delete then re-create the VDOM link from the CLI and set the type to 'ethernet'.
Verification:
get router info6 ospf neighbor
OSPFv3 Process (root)
Neighbor ID Pri State Dead Time Interface Instance ID
100.100.100.2 1 Full/ - 00:00:39 vdom_link0 0
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.