Description
By default, FortiView is enabled on FortiGates running FortiOS firmware version 5.2 and above.
FortiView consoles are visible in the main menu.
However, certain options will not appear unless the FortiGate has Disk log enabled.
This article describes how to enable the Disk log.
Solution
To enable Disk log.
1) Go to Log & Report -> Log Settings and select the checkbox next to Disk.
2) Apply the change.
To enable Disk Logging - CLI:
The following table identifies three separate aspects of FortiView in FortiOS, which are explained in greater detail below:
By default, FortiView is enabled on FortiGates running FortiOS firmware version 5.2 and above.
FortiView consoles are visible in the main menu.
However, certain options will not appear unless the FortiGate has Disk log enabled.
This article describes how to enable the Disk log.
Solution
To enable Disk log.
1) Go to Log & Report -> Log Settings and select the checkbox next to Disk.
2) Apply the change.
To enable Disk Logging - CLI:
# config log disk settingNote:
set status enable
end
The following table identifies three separate aspects of FortiView in FortiOS, which are explained in greater detail below:
