FortiNAC
NOTE: FortiNAC is now named FortiNAC-F. For post-9.4 articles, see FortiNAC-F. FortiNAC is a zero-trust network access solution that provides users with enhanced visibility into the Internet of Things (IoT) devices on their enterprise networks.
cmaheu
Staff
Staff
Article Id 196208
Description
Port channel connected between Cisco switch and Cisco WLC is not being tagged as a Learned Uplink.  All wireless clients connected to the controller's WLANs as well as the controller itself show up as hosts/adapters.


Example: 
Po40 port channel is comprised of two interfaces (Te1/5 and Te2/5) as a Port Aggregate Uplink. Both Te1/5 and Te2/5 are classified as a Port Aggregate Uplink but Po40 port channel is not.


Cisco switch port channel interface support was added in version 8.8.1 (ID 0588911).


Scope
Version: 8.8.1 and above

Solution
Workaround:  Manually set port channel to "Always an Uplink" in the port Properties View.  For instructions, refer to the appropriate link below:



Solution:  This behavior is considered a Known Anomaly.  A complete list of Known Anomalies is available at the following URL:
https://docs.fortinet.com/document/fortinac/8.8.0/known-anomalies



ID 0677628

Contributors