Troubleshooting Tip:The FortiAnalyzer report does not show data for a few devices

[farhanahmed]

Description	This article describes that the FortiAnalyzer report does not show data for a few devices.
Scope	FortiAnalyzer.
Solution	Check if the devices (whose data is missing from the report) have relevant logs in Log View for the same period set in the report settings. If logs are listed in Log View then, check the report settings for the configured limit for the maximum number of rows config system report setting     set max-table-rows <integer> <----- Input integer value (10000-10000000).     set max-rpt-pdf-rows <integer> <----- Input integer value (10000-1000000). end By default, Charts are enabled to display the top 10 rows, change 'Show Top' to '0' to include all rows fetched from Analytical Database. Note: Default charts are not editable. Clone the default chart, set Show Top to '0', and use it in Reports. If all the above configs are verified and data is still missing from the report then, contact Fortinet Support TAC. Related Articles: FortiAnalyzer CLI Reference - Report Setting Creating Charts - Show Top Reports Editor Tab