Description | This article describes how to enable the application detection-based SD-WAN on GUI. |
Scope | FortiOS. |
Solution |
To use the application as the destination in the SD-WAN from the GUI, the Application Detection-Based SD-WAN feature should be first enabled from Feature Visibility. To enable this feature from CLI:
config system global set gui-app-detection-sdwan enable end
Note: This functionality is available in FortiOS 7.2.1 and later. Prior to 7.2.1, individual applications can be selected in SD-WAN rules by default.
After upgrading to 7.2.1 or later, the GUI functionality is available if applications are already configured in SD-WAN rules prior to upgrading. Otherwise, by default, individual applications and application groups cannot be selected in SD-WAN rules.
Related document: Allow application category as an option for SD-WAN rule destination |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.