Description | This article describes how to update the FortiGuard service when FortiGate Blade is not connected to FortiController. |
Scope | FortiGate 5000 series blades. |
Solution |
In the 5000 SLBC system, only the master 5001D blade can update the FortiGuard services '# execute update-now'. Master 5001D blade will sync updates to all slave 5001D blades. Slave 5001D blade cannot run CLI command '# execute update-now'.
Execute the following commands to check which 5001D blade was a master blade. Run the following CLI commands, and upload the outputs to this bug:
# diag sys confsync status
To update the FortiGuard updated when the blade is disconnected from FortiController, Since there is no ELBC HA status, it is not possible to use the '# execute update-now' in the Blade.
The mode has to change to 'none' to run the '# execute update-now'.
# config system elbc |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.