Technical tip: How to check the memory available in a virtual disk created in the Hypervisor for log/data memorization

[gpeluso]

Description	This article describes how to check the memory available in a virtual disk created in the Hypervisor for log/data storage.
Scope	FortiGate-VM.
Solution	The amount of memory used and available in the Virtual disk can be checked with the command below: diag hardware deviceinfo disk Disk SYSTEM(boot) 2.0GiB type: SSD [VMware Virtual disk] dev: /dev/sda partition 231.0MiB, 111.0MiB free mounted: Y label: dev: /dev/sda1(boot) start: 2048 partition 1.7GiB, 1.4GiB free mounted: Y label: dev: /dev/sda2(boot) start: 526336 Disk Virtual-Disk ref: 16 30.0GiB type: SSD [VMware Virtual disk] dev: /dev/sdb partition ref: 17 29.4GiB, 1.5GiB free mounted: Y label: LOGUSEDXD1340E28 dev: /dev/sdb1 start: 2048 If the disk is full it is possible to remove from the disk all the logs memorized with the command below: execute log delete-all