Technical Tip: How to configure NAC Policies for W...

laltuzar · 05-02-2024

Description This post describes what Short Guard Interval is, how it is used on FortiAPs, and when to enable this feature. Scope FortiAP supporting 802.11n and 802.11ac. Solution A Guard Interval (GI) is a period of time between symbol transmissions....

laltuzar · 05-01-2024

Description This article describes the steps to take on a managed FortiSwitch or standalone FortiSwitch to disable console access. Scope FortiSwitch 7.2.0 or above. Solution On a managed FortiSwitch, the console access on FortiSwitch can be disabled ...

laltuzar · 03-13-2024

Description This post describes the steps to configure an SSID with a bandwidth limited. This feature is useful for example, for a customer that wants to create an SSID for their guests but does not want to share all the bandwidth available. Scope Fo...

laltuzar · 02-27-2024

Description This article describes the steps to enable a recommendation by a Switch controller to lock down the topology through the CLI. This recommendation aims to prevent other FortiSwitches from being connected to the network and causing changes ...

laltuzar · 01-31-2024

Description This article describes how to create an automation stitch on FortiGate to automatically send an email when a certain port comes up or down. It is possible to differentiate between the serial number of a FortiSwitch, so the stitch can be t...

laltuzar · 03-07-2024

Thank you! Pretty useful post!

laltuzar · 01-16-2024

Great tips. Thanks!

laltuzar · 12-12-2023

Take a look into this post to answer the first question: Technical Tip: Cannot get more than 8 FortiSwitches managed on a FortiGate Regarding the second question, you should not have any problem mixing models on the same ring as long as the STP is we...

laltuzar · 10-31-2023

Just one recommendation: Keep 3 SSIDs at the most* to avoid management frame congestion. More than 3 SSIDs can cause the frame congestion.

laltuzar · 09-26-2023

Great post! It is also possible to configure STP priority with custom commands on FortiGate:https://community.fortinet.com/t5/FortiSwitch/Technical-Tip-Configure-STP-priority-using-custom-command-on/ta-p/195141

User Statistics

User Activity

Technical Tip: Short Guard Interval

Technical Tip: How to disable console port on FortiSwitch (managed and standalone)

Technical Tip: How to configure an Open SSID with limited bandwidth

Technical Tip: Enable lock-down-topo-lldp-profile on managed FortiSwitches

Technical Tip: Configure Stitch to alert when a port from a FortiSwitch came up/down

Re: Troubleshooting Tip: FortiAP showing Error: Device Already In Inventory

Re: Technical Tip: Good practices for a standalone FortiSwitch

Re: fortiswitch ring topology with different model

Re: Technical Tip: RF Design for Wireless networks

Re: Technical Tip: How to elect the Root Bridge by adjusting the priority

Technical Tip: How to configure NAC Policies for W...

Technical Tip: Change FortiAP-UxxxF Boot image ID ...

Troubleshooting Tip: Common issues when upgrading ...

Technical Tip: How to capture packets over the air...

Technical Tip: How to configure an Open SSID with ...

KCS