FortiGate
FortiGate Next Generation Firewall utilizes purpose-built security processors and threat intelligence security services from FortiGuard labs to deliver top-rated protection and high performance, including encrypted traffic.
rmreddy
Staff
Staff
Article Id 198609

Description


Configuring admin disclaimer page on FortiGate using Pre- and Post- login banner setting.
The pre-login banner setting will show the admin disclaimer page before the user reaches the login page in the GUI or the login prompt in CLI command.
The post-login banner setting will show the admin disclaimer page after entering the login credentials in the GUI or the CLI command.

This article describes how to configure the admin disclaimer page.

 

Scope

 

FortiGate.

Solution


The pre-login banner or post-login banner setting can be made using the following CLI commands.

 

config system global
    set pre-login-banner enable
    set post-login-banner enable
end

 

A sample disclaimer message is given below.


 

How to Edit/Modify the default disclaimer message:

 

Go to System -> Replacement Messages -> Extended View -> Pre-login Disclaimer Message. The edit screen is in the bottom right corner of the page.

Select  'Save' after the editing is done.

 

After modification, it will be possible to see the Modified check mark on the same page.

 

Related Article:

Technical Note: How to view all replacement message in GUI with V5.0.0