SNMP configuration on multi Vdom

[HarshaS]

Hi 

can we do the SNMP configuration for PRTG network monitoring

when fortigate firewall is working with multi vdom and dedicated management port ?

Forti OS is 6.4.12 and there are four vdoms that management interface is working on isolated VDOM,

[mpandya]

Hi ,

Please follow the below article

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuring-SNMP-when-VDOM-is-enabled/ta-p...

And for HA 
https://community.fortinet.com/t5/FortiGate/Technical-Tip-SNMP-communication-working-scenario-with-r...).

[HarshaS]

hi,

is this for forti OS 7.2 + version ?

I have Fortios 6.4.12 version and it is not working "set vdoms" command,

can I know that version has any compatibility issue ?

[vbandha]

Hi @HarshaS ,

Yes, that feature is only available in FortiOS 7.2+

Regards,

Varun

[remo053 · Accepted solution]

Did you enable SNMP on the interface receiving the traffic? This is done in the interface settings. It's a check box, just like HTTP(s) and SSH access. You also have to configure the appropriate settings under the System > SNMP menu to define your SNMP community string, hosts, and/or credentials, as appropriate for the version of SNMP you are using.

[HarshaS]

yes, I already did that you mentioned steps. but not responded firewall port to the snmp Get requests.