Technical Tip: How to monitor the individual VPN t...

hrahuman_FTNT · 01-11-2024

Description This article describes the External Threat connector behavior when High Availablity. Scope FortiGate. Solution When the External Threat connector is configured in High Availability, the primary unit has access to the resource's primary st...

hrahuman_FTNT · 11-19-2023

Description This article describes how to prevent the 'Tunnel to fortimanager is down' error from appearing in event logs when FortiManager is not configured. Scope FortiGate. Solution In this example, the FortiCloud status is enabled and central man...

hrahuman_FTNT · 02-09-2023

Description This article describes how to monitor disk usage with SNMP OIDs. Scope FortiGate. Solution The following OIDs are used to monitor disk usage with SNMP OIDs. FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgSystem.fgSystemInfo.fgSysDiskUsa...

hrahuman_FTNT · 02-08-2023

Description This article describes how to update the FortiGuard service when FortiGate Blade is not connected to FortiController. Scope FortiGate 5000 series blades. Solution In the 5000 SLBC system, only the master 5001D blade can update the FortiGu...

hrahuman_FTNT · 01-31-2023

Description This article describes how to enable logging for one-arm filter traffic. Scope FortiGate. Solution Basically, with one-arm sniffer mode, it will examine, and log packets based on the configured IPS sensor and application control list. So,...

hrahuman_FTNT · 02-21-2024

Hi, You can view the VLAN in CLI as below : # #show system interface Please refer : https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-create-a-VLAN-tagged-interface-802-1q-on-a/ta-p/193893 -Habeeb

hrahuman_FTNT · 12-26-2023

Hi, Please use the The Automation Stitch feature of the Security Fabric to take the automation backup of logs in text format. Follow the below article and change the only the CLI commands : https://community.fortinet.com/t5/FortiGate/Technical-Tip-Ho...

hrahuman_FTNT · 02-08-2023

The dashboard is just showing your Fortigate's public IP address as it is seen by FortiGuard Servers. This is purely informative and cannot be changed directly if your Fortigate is hidden behind NAT. More details can be obtained in CLI with command: ...

hrahuman_FTNT · 11-22-2022

Thank you for your input... Appreciated! It is corrected now. -Habeeb

hrahuman_FTNT · 08-25-2022

Hi, Please use the below link to open the same article. https://docs.fortinet.com/document/fortiextender/4.1.2/admin-guide/861853/configure-static-routing -Habeeb

User Statistics

User Activity

Technical Tip: External Threat connector behavior when High Availablity

Troubleshooting Tip: 'Tunnel to fortimanager is down' event appears in logs even though FortiManager is not configured

Technical Tip: How to monitor disk usage with SNMP OIDs

Technical Tip: How to update the FortiGuard service when FortiGate Blade is not connected to FortiController

Technical Tip: How to enable logging for one-arm filter traffic

Re: How do I see my VLANs?

Re: How to archive Firewall log on text file

Re: System Information WAN IP incorrect

Re: KB correction

Re: error in the fortigate website

Technical Tip: How to monitor the individual VPN t...

Re: How do I see my VLANs?

Technical Tip: External Threat connector behavior ...

Re: KB correction

Re: Set override enable command

Re: Fortigate return to NAT mode from transparent ...

Re: Fortigate IPS DB Update

Fortinet Training Institute

KCS