Description This article describes how to upgrade a FortiNAC-F setup
running NAC-OS using an interim build image. The procedure is used to
upgrade the firmware to a version suggested and offered by the TAC
support team, mainly for testing new feature...
Description This article describe how to use events and audit logs in
cases when a new issue arises on an existing setup that was previously
working normally. This also applies for an intermittent issue that
appear at specific time only. Scope FortiN...
Description This article describes that in authentications that include
MSCHAPv2, the Winbind tool needs to be configured and FortiNAC must be
joined to the domain for the authentications to succeed. Scope FortiNAC,
Windows Server AD. Solution In lat...
Description This article describes that since the product FortiNAC
Analytics Reporting is discontinued, FortiAnalyzer is recommended as a
reporting platform. These details are covered in the Administration
guide. Scope FortiNAC, FortiAnalyzer. Soluti...
Description This article describes that in FortiNAC integrations with
Meraki switches (cloud-managed) some RADIUS reauthentication may happen
randomly. This will disrupt the connection in the end hosts (a few
seconds between the re-authentication). S...
You can also use the diagnose commands:FW # diagnose firewall
viprealserver Load balance real servers.virtual-server Virtual-server
diagnostics. and for traffic sniffing: diagnose sniffer packet any 'tcp
and port 2003' 4 0 l
Do the end host actually reach the FAC portal while not being
authenticated yet? Can you tell if this is a reachability or a portal
redirection issue? If it's not reachable at all, than it seems that the
firewall policy and the exempt destination is ...
According to FNDN documentation the URL seems correct but the password
parameter should be changed to passwd If not joined yet I would strongly
suggest you to join the developer network. Two sponsor approvals are
needed and your Fortinet local repres...
Have you added the /portal as part of the URL at SSID configuration and
is the FAC added as exemption te be reached by the hosts that are not
yet authenticated? You need to add also the Access Points subnet under
Portal configuration in FAC. Helpful ...