When we configure this SSL VPN MAC address filtering, what system limit
would dictate the max number of MAC addresses we can configure on an FGT
(no
vdom/muti-vdom)?https://community.fortinet.com/t5/FortiGate/Technical-Tip-MAC-address-check-on-SSL-VP...
Please let me make sure the order a FGT examine policies.If there is a
specific policy from a specific interface like "lan" to another specific
interface like "wan1" with "any" source and "any" destination, it would
be examined before another policy ...
I'm referring two KBs below for this
issue:https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGate-alt-primary-alt-secondary-DNS-server/ta-p/275269https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuration-per-VDOM-DNS/ta-p/1...
We recently upgraded our FortiManager-VM from 7.0.8 to 7.2.4 and have
discovered the Meta Field we've been using to "plug" values per device
into CLI templates are not supported any more and have to migrate all
those per-device mappings from Device M...
I couldn't find any article clearly saying either "not possible" or "how
to do it" online so far. But most of our FortiToken Mobile users who
tried migrating from an old phone to a new phone told me a migration
didn't work. So we always reactivate a ...
No. 224.x.x.x is a multicast IP, not a general public IP Site-B got.I
meant a user with a desktop/laptop at Site-B can go to Google, then
search "what is my ip" to get an IP like below:
That's probably because Site-B doesn't have two internet circuits on
both wan1 and wan2.What is the public IP at the Site-B when someone
on-site search "What is my IP" at Google? That's the IP you need to set
a staitc route toward wan2 and the IPsec ...
Are those IPs are just faking your real addresses on both ends? Or the
public IPs are NOT terminated at the VPN termination devices but at the
ISP's GW devices? You can not set up VPN to an private IP behind a NAT,
has to be the public IP. Toshi
If the other end of the public IP is inside of its ISP's network, the
IPSec wouldn't come up though unless the ISP can set up port-forwarding
for UDP 4500 and ESP packets from their NAT device to the IPsec
termination device.Does the IPsec come up if...
Regardless if you use GUI or CLI for configuration, you have to
understand the routing mechanism involving two internet circuits. Then
if you need to change the default behavior, like dedicating one internet
circuit for a specific purpose but no gene...