As all the other users at FortiCloud must have gotten, I received an
announcement email per email account for 2FA auth enforcement starting
June the 7th.My question is if it would apply to this Forum login
account. I've kept using my old account emai...
When we configure this SSL VPN MAC address filtering, what system limit
would dictate the max number of MAC addresses we can configure on an FGT
(no
vdom/muti-vdom)?https://community.fortinet.com/t5/FortiGate/Technical-Tip-MAC-address-check-on-SSL-VP...
Please let me make sure the order a FGT examine policies.If there is a
specific policy from a specific interface like "lan" to another specific
interface like "wan1" with "any" source and "any" destination, it would
be examined before another policy ...
I'm referring two KBs below for this
issue:https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGate-alt-primary-alt-secondary-DNS-server/ta-p/275269https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuration-per-VDOM-DNS/ta-p/1...
We recently upgraded our FortiManager-VM from 7.0.8 to 7.2.4 and have
discovered the Meta Field we've been using to "plug" values per device
into CLI templates are not supported any more and have to migrate all
those per-device mappings from Device M...
Of course those different console cables work fine with any type of
FGTs, including 40F, 60F, 100F and so on. Only "F" Series FSW seems to
be different based on my experience.Toshi
First, are you using the console cable came within the shipping box? You
might have some problem if you're using a different kind like Cisco
console cable. The same console cable works perfectly fine with "E"
model or "D" model of FortiSwitch.I had t...
Do you have this enabled?config system global set login-timestamp
enableendBelow KB has a typo: should be "enable", not
"enabled":https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuring-last-successful-failed-login-details/ta-p/191886To...
The base concept for Fortilink-managed FortiSwitches(FWSs) is all VLANs
on the FSWs need to be confitured ON the FortiLink. Even if you created
the same VLAN subinterfaces (same VLAN IDs) on both the hard-switch and
FortiLink sides, they're separated...
Sorry I misstated that part. We always locally upload the config via
TFTP server in CLI. Below is our operation to swap hardware whenever we
need to replace whatever the reason is for those customers whose FGTs
are managed by our FMG-VM, which I need...