I just ran into this: We have a Windows DHCP that has a scope for a
vlan.the vlan interface on the FGT100E is set to do dhcp relaying to
this Windows DHCP.the Windows DHCP also has dhcp option 138 set for all
scopes it has.If I now connect a client t...
I did the following: - upgraded FMG to 7.0.11 while the FGT still were
on 7.0.13 => everything still worked fine afterwards- upgraded the FGT
to 7.0.14 during the next night (scheduled) => since then FGT keep
losing the connection to FMG when I deplo...
We just ran into this: today our FortiMail states it has no antispam and
virus outbreak license.It did have one because it also states the last
update of the antispam definitions was on 2024-02-06 and it cannot do
that without vallid license. If I lo...
We just ran into this issue and I just wanted to warn you to not do so
too: if you rename global address objects in FMG you can only do that
via script (TAC said this).If you assign this to an adom afterwards it
will be correctly assigned.You will ha...
I keep encountering this behavior: all of a sudden on some clients https
websites stop working.every time this starts the only thing noticable on
the FGT is that the memory usage is >=60%. Mostly around 63-65%. It
however does not reach the threshold...
hm we are doing IPSec VPN with AD users and FortiToken as 2FA. However
we happen to run a FortiAuthenticator that acts as radius server for the
FGT. Then FAC does all the authentication here and FGt just has the FAC
as radius server and the vpn set t...
BTW: if you create the two vlan interfaces on WAN2 with correct vid and
each has an ip out of the corresponding vlan you don't need static
routes because in this case there is connected routes coming with those
interfaces. In that case only the other...
ok one port can not be a trunk on a fortigate. You would have to create
two vlan interfaces that are tied to WAN2 on your FGT. Then you have to
have a default route and static routes for what you need.However you can
only have more than one default r...
I have to admit that TAC did provide me the bug it but I've overseen it
in the ticket :\Here it is; 1004231 - 1460: After upgrading FGT from
7.0.13 to 7.0.14, start loosing FMG connections because of fatal unknown
CA