Description This article describes how to back up and restore
FortiAuthenticator via Rest API. Scope FortitAuthenticator. Solution To
enable the Rest API, review the KB article Technical Tip: Enable
FortiAuthenticator Rest API or the guide Initializi...
Description This article is an OCSP introduction and configuration in
FortiNAC, follow this document for a description: OCSP for X.509
certificate revocation checking This protocol specifies the data that
needs to be exchanged between an application ...
Description This article describes how to configure and troubleshoot
Firewall TAGs between FortiGate and FortiNAC-F, or legacy FortiNAC.
Scope FortiGate and FortiNAC-F/FortiNACOS or legacy FortiNAC. Solution
Log in to the FortiNAC GUI and go to Syste...
Description This article describes how to access the Secondary
FortiNAC-F Server GUI in HA mode with shared IP. Scope Version:
FortiNAC-F/FortiNAC-OS 7.2.0 and greater. Solution On the HA FortiNAC-OS
system with VIP, the Secondary Server by default i...
Description This article describes that the 'Test Device Profiling Rule'
does not match when the 'Legacy View Architecture' is enabled. Scope
FortiNAC v9.4.2 impacted. Solution If creating a DPR based on Vendor OUI
for example it should be possible t...
Hello @abbio90 FGT 5.2.15 quite old :)Then check the routing part on
FW:get router info routing-table allGoing to to Router > Static > Static
Routes.Create a route external --> share the error.Check the
handbook:https://fortinetweb.s3.amazonaws.com/d...
On the output.nessus you should see similar output:
yams.ActiveFingerprint FINER :: 2024-MM-DD HH:MM:SS:830 :: #66 :: rule =
Rule1 isEnabled = true yams.ActiveFingerprint FINER :: 2024-MM-DD
HH:MM:SS:834 :: #66 :: Criteria unsatisfied. Putting back o...