Description This article describes how to create DNAT/VIP from single
external IP to multiple internal IP Scope FortiGate. Solution The key
would be to configure optional filter on the DNAT/VIP for all related
external IP. This would allow multiple i...
Description This article describes that the collectoragent.exe (FSSO)
sends traffic to port 139 / 445 / 389 to the user IP (internal or
external IP address). Scope FSSO, FortiGate, collecteragent.exe.
Solution Refer to the following truncated pcap wh...
Description This article describes how to transfer an existing VLAN from
one interface to another interface (existing or new). Scope FortiGate
v7.2.x and v7.0.x. Solution Another alternative way for this method is
to use the 'Integrate Interface' fea...
Description This article describes how to manually configure the IPv6
hop limit on the FortiGate interface. Scope FortiGate IPv6
configuration. Solution The IPv6 hop limit can be configured via CLI but
first, IPv6 must be enabled on the FortiGate. Go...
can you run this command and see if it import the token again?execute
fortitoken-mobile import 0000-0000-0000-0000-0000if it doesnt, running
the debug and assigning the token might give clue on what's happening :
dia de cons times endia deb app forti...
Hi. Although this post is significantly old, I just would like to share
my finding You may configure a dummy portal with tunnel mode and
web-mode disabled, and assign All Other Users/Groups to this portalRef :
https://docs.fortinet.com/document/forti...