Hello! I hope someone can help point me in the right direction here;I am
trying to get BGP-peering between my Fortigate and my ISP's Routers
working. I have gotten AS Number, Password, IP-adresses, VLANS etc to
use from my ISP and they have configure...
Hello! I've encountered an issue with an IPSEC tunnel setup between our
"Site A" and a customer's location, "Site B." Despite extensive
troubleshooting, I've been unable to find a solution, and I'm hoping the
community here might have some insights. ...
Thank you everyone for the answers and pointers in this post.I got in
touch with my ISP and they did some troubleshooting and on their side
they could see authentication failed in their logs. Which meant there
was a typo in the PSK i had set on the B...
Hello, I thought i should give an update as I have made some progress.
My problem was setting allowed vlans all on the Fortiswitch ports
connected to my ISP's BGP peers. I got some help from a Fortinet
engineer, and I needed to set the specific VLANS...
Thank you for the replies! @Toshi_Esumi oh yeah i saw that now, I messed
it up in the examples given here. But the IP/subnets are correct
IRL.@dbhavsar Not sure I understand. The ISP's BGP ports (Port 25 on FSW
A and B), are in the root VDOM with the...
Thanks again for the suggestion, when i type diagnose ip router bgp all
enableit says logging enabled for 30 minutes, and then rundiagnose debug
enableIt accepts the command but nothing happens. Looks like there is no
BGP traffic going at all.
Thank you for the reply, you mean the IP of the FGT in the VLAN between
the FGT and BGP peer? In this example: 100.10.10.9. I tried that, and
looks like there is no difference.
