The goal is to pass vlan 8 and vlan 40 MGMNT without tagging. how i can
do it?The configuration inside internal port 1, but my suggestion is to
be able to use vlan 40, similar to native mgmnt ap, and the vlan 8 pass
for the trunk as well.Vlan 8 is cu...
Hi @AEK I apologise for not getting back to you earlier; up until today,
I was outside.My customer has, at least, chosen to install a switch.I
appreciate your input. Thanks for all
Hi @AEK The purpose is the Meraki AP and printer works .The management
vlan is often similar to native except that the AP is registered under
this mgmn vlan in my case (40).For this reason I need to pass both vlan
8 and vlan 40 . Iin this instance, I...
hi @Similar to native vlan . I want to utilise vlan 40 for AP management
and vlan 8 for users/ printres when they user connect to the AP get
range vlan 8
Hi @AEK show system interface internalconfig system interfaceedit
"internal"set vdom "root"set ip 10.27.8.1 255.255.254.0set allowaccess
pingset type hard-switchset stp enableset role lanset snmp-index 15next
