| Description | This article describes how to resolve the issue of not updating the 'Modified On' field even after running a PB with a Create Record with some values modified. |
| Scope | FortiSOAR v7.4.0. |
| Solution |
The Playbook below is designed to simply show the symptom:
Uniqueness conflict settings: Update existing records (all fields). The playbook updates the existing record with the new values that you have specified in this step.
When the above PB is executed, the following alert record is created by CREATE RECORD. It is possible to see Priority Weight is 1.
Next, the priority Weight value of the Create Record was changed to 2 and ran the same PB again.
It is possible to see that it was run at intervals of 1 minute.
If the Alert Record is checked after running PB, it is possible to see that the Priority Weight has been changed to 2, but the value of the Modified On field has not been updated.
This issue symptom was identified up to v7.4.0 and has been resolved since v7.4.1.
Note: Unlike UPDATE REORD, in the case of CREATE RECORD, if the 'Record Uniqueness' field of the module selected in the Create Record step is not set to Name, but is specified as a Source ID or other unique value, a new record is created for each PB run, and 'Created On' and 'Modified On' are output the same as at the time of creation. To check the change history of the created record, it is possible to specify the unique value of 'Record Uniqueness' before upgrading, and then create a new record and check the time of change with Created On, rather than updating the existing record. |
