rphulekar
Staff
Staff
‎07-06-2023
Last activity: Jul 6, 2023 4:00:24 PM
60 Profile 60% Complete
Most Liked Posts Recent Solutions
No Content Available

User Activity

Description This article discusses the maximum number of OSPF neighbors allowed in FortiOS. Solution The limit of a maximum number of 10 per VDOM, which is as stated in the Maximum Value table for version 4.3, 5.0.x, 5.2.x is restricted only to the s...
Description This article describes that in FortiGate, to set status disable under ospf-interface will only prevent the parameters defined here for the OSPF interface from being used. It will not disable an OSPF interface and bring down the OSPF. Solu...
Description In FortiOS v5.2.x and 5.0.x, policy based IPSec is disabled only in GUI by default. It can be configured in CLI or by using the Enable feature in the GUI. Once enabled, IPSec tunnels can be used in the Firewall Policy. Solution To enable ...
Description In FortiOS 4.3.x, the CAPWAP was enabled by default on all physical and VLAN interfaces. In most cases a FortiAP is only connected to the internal interfaces to create a private WiFI network inside the network.However, this can be a poten...
DescriptionIn the version 5.0.x and 4.3.x there were 2 Firewall polices, one standard from WAN interface to the internal interface with action = sslvpn and the second one is ssl.root to the internal interface.In the version 5.2.x, the firewall policy...