Description This article describes the maximum retransmission attempts
the Fortigate TCP stack will attempt before resetting a TCP connection
Scope FortiGate. Solution In TCP protocol, every stream of data sent to
one side requires an ACK packet to b...
Description This article describes the important values in anomaly logs.
Scope All supported versions of FortiGate/FortiOS. Solution When a DoS
policy rule is triggered, the following log is generated under Anomaly
logs: "date=2020-06-15 time=11:33:3...
Description This article describes general actions which can be taken
and which information should be sent to Fortinet Support in the case of
an unexpected increase in CPU usage. Scope FortiGate, FortiProxy.
Solution Run the following CLI command. Ex...
Description This article describes the effects of the 'disable' action
for local categories in a web filter. Scope FortiOS 7.0, 7.2, 7.4.
FortiProxy 7.0 and above. Solution Local categories can be created to
override FortiGuard URL categorization. In...
Description This article explains an issue where an intended webfilter
replacement message instead shows as a 'Your connection is not private'
warning. A solution is provided. Scope Any supported version of
FortiGate. Solution When the web filter pro...
Hello, Think of the Zones like different interfaces, you can set up
sd-wan zone with members port1 and port2 and set the zone as destination
intf in a policy. Then you can create a specific rules for how to
balance the traffic between the interface m...
Hello, You can try with webfilter static URL. Simply create a Static URL
entry to block "www.linkedin.com/jobs/ "
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-a-static-URL-filter-feature-to-allow-block/ta-p/193086
Note: You must al...
Hello, You don't get a straight answer, because there isn't. A default
value which will protect all possible environments will practically have
block access to internet. -AntiVirus default will protect you as overall
there is not a lot to modify on i...