Description This article describes what configuration is required to
make a connection with the Syslog-NG server over a TCP connection. Scope
FortiGate, Syslog. Solution The firewall makes it possible to connect a
Syslog-NG server over a UDP or TCP c...
Description This article describes why the Dynamic VLAN assignment
feature gets disabled Scope FortiGate, SSID. Solution By default, the
Dynamic VLAN assignment is disabled. This feature is useful when users
need to change the VLAN automatically afte...
Description This article describes how to view VoIP profiles in UTM
features of the GUI. Scope FortiGate. Solution By default, the Firewall
policy operates in Flow-based inspection mode, and due to this reason,
the firewall fails to display the VoIP ...
Description This article describes how to make it possible to configure
SAML on FortiClient. Scope FortiGate, FortiClient. Solution To enable
SAML authentication, it is necessary to enable the SSO feature from the
FortiClient settings first. Select t...
Description This article describes how to write a script to update FQDN
IPs frequently. Scope FortiGate. Solution To update the IP addresses
associated with a specific FQDN regularly, run the following script.
This script facilitates the periodic upd...
Hi @owall, Could you kindly confirm whether you are connecting to
FortiClient or using the SSL Web mode? If you connecting the
FortiClient, please enable commands on FortiGate CLI below before
establishing the RDP connection di de reset di de flow fi...
Hello @fortimaster, Could you kindly provide the configuration details
for the IPsec dial-up tunnel? Furthermore, could you confirm whether the
tunnel goes down frequently at specific intervals or randomly? Also,
could you specify whether the issue i...
@wendelin, can you please confirm if are you still on version 7.4.2? If
yes, could you please disable the npu-offloading on the affected phase2
and monitor whether the issue persist config vpn ipsec phase2-interface
edit set npu-offload disable end ...
