Troubleshooting Tip: After a failover, FortiAP dev...

Adolfo_Z_H · 05-16-2024

Description This article describes how to resolve connectivity issues observed when using a DAC cable on FortiSwitch 148F. Scope FortiSwitch 148F series units and DAC Cable FN-CABLE-SFP+3 also reported as DAC-SFP-30-03-HN. Solution There is a known i...

Adolfo_Z_H · 05-15-2024

Description This article describes that on the FortiGate switch controller section, log entries with msg="error:0A000416:SSL routines::ssl/tls alert certificate unknown -- " can be observed after the upgrade to v7.4.2. Scope FortiGate wireless contro...

Adolfo_Z_H · 05-09-2024

Description This article describes RX Discard counters on port statics and which kinds of packets FortiSwitch OS includes on it. Scope All FortiSwitch models and versions. Solution Some customers observe RX Discard packet count increases over time. T...

Adolfo_Z_H · 03-26-2024

Description This article describes how to set up manual discovery for all FortiAPs on a FortiGate to minimize downtime after disconnection. Scope FortiOS release v7.2, v7.4. All forti FortiAP models and versions Solution There are 6 discovery methods...

Adolfo_Z_H · 12-20-2023

Description This article describes that adding a split 40G into 4 x 10G or a 100G to 25x 4 on FortiSwitch-1024E / FortiSwitch-T1024E using a breakout cable does not pass any traffic. Splits ports seem to be always on ALARM STATE and besides physical ...

Adolfo_Z_H · 05-17-2024

great stuff!

Adolfo_Z_H · 03-13-2024

Nice!

Adolfo_Z_H · 02-19-2024

Hola Dilan, gracias por contactarte con la Comunidad de Fortinet. Normalmente este es un foro en inglés, pero habemos gente que habla español y portugués por aqui :) Basicamente lo que sucede es esto: https://community.fortinet.com/t5/FortiAP/Technic...

Adolfo_Z_H · 09-27-2023

ok let`s wait until Assigned engineer concludes his investigation, you may suggest him to look on my recomendation. i suggest you to follow one resolution path to make easier troubleshoot for both you and your Assigned engineer.

Adolfo_Z_H · 09-27-2023

Please do not use vlan all settings on any equipment, it is not a good practice and in case of a cabling/misconfiguration issue it could worsen issues. (allow tagged 1-4094) just use this document to know how to configure FSW vlan on stand alone mode...

User Statistics

User Activity

Troubleshooting Tip: DAC cable issues on FortiSwitch 148F (FN-CABLE-SFP+3 DAC-SFP-30-03-HN)

Troubleshooting Tip: Switch-controller 'msg="error:0A000416:SSL routines::ssl/tls alert certificate unknown --"' observed after the upgrade to v7.4

Troubleshooting Tip: How to interpret RX drops on FortiSwitch devices

Technical Tip: Enhance recovery times for FortiAPs after disconnection from FortiGate

Troubleshooting Tip: Split port on FortiSwitch-1024E and FortiSwitch-T1024E does not pass any traffic using a breakout cable

Re: Technical Tip: Short Guard Interval

Re: Technical Tip: How to configure an Open SSID with limited bandwidth

Re: Access Point

Re: S148FN Standalone. VLAN other than native cannot communicate.

Re: S148FN Standalone. VLAN other than native cannot communicate.

Troubleshooting Tip: After a failover, FortiAP dev...

Troubleshooting Tip: How to interpret RX drops on ...

Technical Tip: Enhance recovery times for FortiAPs...

Technical Tip: Mac Address Randomization challenge...

Technical Tip: WIFI enterprise authentication does...

Re: FortiAP Advanced Management License

KCS

Fortinet Xperts LATAM & Caribbean