Description This post describes what Short Guard Interval is, how it is
used on FortiAPs, and when to enable this feature. Scope FortiAP
supporting 802.11n and 802.11ac. Solution A Guard Interval (GI) is a
period of time between symbol transmissions....
Description This article describes the steps to take on a managed
FortiSwitch or standalone FortiSwitch to disable console access. Scope
FortiSwitch 7.2.0 or above. Solution On a managed FortiSwitch, the
console access on FortiSwitch can be disabled ...
Description This post describes the steps to configure an SSID with a
bandwidth limited. This feature is useful for example, for a customer
that wants to create an SSID for their guests but does not want to share
all the bandwidth available. Scope Fo...
Description This article describes the steps to enable a recommendation
by a Switch controller to lock down the topology through the CLI. This
recommendation aims to prevent other FortiSwitches from being connected
to the network and causing changes ...
Description This article describes how to create an automation stitch on
FortiGate to automatically send an email when a certain port comes up or
down. It is possible to differentiate between the serial number of a
FortiSwitch, so the stitch can be t...
Take a look into this post to answer the first question: Technical Tip:
Cannot get more than 8 FortiSwitches managed on a FortiGate Regarding
the second question, you should not have any problem mixing models on
the same ring as long as the STP is we...
Great post! It is also possible to configure STP priority with custom
commands on
FortiGate:https://community.fortinet.com/t5/FortiSwitch/Technical-Tip-Configure-STP-priority-using-custom-command-on/ta-p/195141